India represents the fourth largest automobile market in the world and the second-largest two-wheeler market. It is also a country with massive dependency on oil imports, with a USD 112 billion oil import bill in FY19. EV market likely to be Rs 50,000-cr opportunity in India by 2025. India is expected to command leadership in EV space with a projected share of 30% of new vehicles sold by 2030. Government has tabled a proposal to have a charging station every 3KM in major cities & every 50KM on major national highway. Growing Sales of Electric Vehicles - A Significant Opportunity for Li-ion Batteries Market. The government plans to offer $4.6 billion in incentives to companies setting up advanced battery manufacturing facilities as it seeks to promote the use of electric vehicles and cut down its dependence on oil, according to a government proposal seen by Reuters.
In this fast moving Electric Vehicle Market Academy of EV Technology a fully focused in Entrepreneurship development offering a startup and business friendly course to make you or your organization to flourish in this new age technological market.
This course will deliver from basic of EV to EVSE equipment like Lithium-ion battery, Battery pack assembly process, EV Motor, Charger, charging station development and all others parts/ equipment’s calculation, selection, building a Legal Foundation, Understanding Finance Basics, Business Planning and Fundraising.
TRAINING METHODOLOGY:
Live Interactive Classes::
AEVT Live Interactive Class, where students and teachers meet together at schedule class time with whiteboard, voice and live video, Lectures and Question answer occur at the same hour.
Our expert faculty members take session on each paper that is delivered through live sessions. These sessions are joined by students from India and Abroad. Trainers will discuss in each class session about Key concepts, whiteboard calculation, design, costing, documentation, case studies and real life examples. Students also get chance to clarify their doubts / academic clarifications. If by any chance you miss these live classes, don't worry, each class recorded sessions are uploaded in the AEVT E-Library/LMS.
Hands-on Practical
We know that only theoretical knowledge by online or virtual classes are not sufficient to get full expertise. An individual needs a practical exposure to flourish in a Job or business market.
So we offer practical session at AEVT Lab/Workshop after completion of live interactive online classroom session .In this approach a trainees can fulfill his/her knowledge in a very effective way and time.
We offer project-based blended learning experiences that promote academic and career success for Technical Education.
Teaching and Learning Material
AEVT have dedicated online library (AEVT E-Library) facility for students and stored all Learning Material (E-book, class recording, business releated documents) at AEVT E-Library. AEVT E Library System provides access to more than 100 + e-books covering all fields of knowledge, e.g. EV Battery - BMS, Charging Station Design, Installation, Government rules and Business opportunity etc and also we have a huge collection of national and international journals, case studies, research papers.Student can access this E-library for self study.
Eligibility
For Entrepreneurs, Startups:
Minimum Educational Qualifications: 12th Pass
Minimum age 18 years, No Upper Age bar
GATE Trust dedicated service desk will provide you with access to a group of engineers, advisors to supporting you and your business needs.
Certificate will be Awarded by
Academy of EV Technology, A Unit of Global Advanced Training & Educational Trust, Regd. under NCT New Delhi, Govt. of India
Online Virtual Class and Offline Practical Course
Course Syllabus:
Click to Explore
Unit: BEE
Basic Electrical Engineering
Electrical parts of electric Vehicle - The motors, batteries, inverters, chargers, and power wiring between those parts, are what's new in the car now that it is finally electric again.
Major Components in an Electric Vehicle Powertrain - Vehicle Dynamics, Controllers
Different Types of High-efficiency Motor Technology
Motor Types
Selection and sizing of Motor
Motor Control Functions and Applications
Selection methodology
Power Converters
PID Controlled PWM
Others Electronic components - Switches, High-performance Control Circuit, Microcontrollers, Gate Drivers, Snubber Circuits, Electric engine, Regenerative braking
Grid and Renewable Sources - Effect of EV charging on the Distribution Grid
Unit: EVT
Electric Vehicle Technology
Electric vehicle configuration Vehicle Dynamics
Types of Electric Vehicle -
Hybrid Electric Vehicles
Plug-in Hybrids
Battery Electric Vehicles
Type of Charger
Clarification & Specification Discussion
Bharat EV AC Charger (BEVC-AC001)
Bharat EV DC Charger (BEVC-DC001)
DC Fast Charging
Basic principles of regenerative braking, Basic principles of conventional braking
Click to Explore
Unit: B-1
Types of Battery and Classification
A brief classification of li Ion cell technology and its electro-chemistry. Advantage and disadvantages of over different cell technologies.
History of development of Battery Technology
Energy storage technology in Electric vehicle
Comparison between IC Engine and EV energy storage Technology
Introduction to Lithium ion Cell
Role and responsibilities of BMS
Basic understanding of BMS Connections
Unit: B-2
Li ion cell Parameters
Battery cell parameters like cell voltage
Cell AH, Specific energy, life Cycle
Charging and discharging curve of li ion cells
C-rating,
Self discharge and other parameters like SOC, DOD
Unit: B-3
Battery Pack Sizing Considerations
Battery Pack sizing consideration like Time and charge/discharge cycles
Beginning of life (BOL)
End of life (EOL), Time
Battery life testing
Unit: B-4
Battery Charging, Protection, and Management System
why a BMS need for a battery pack
BMS building blocks
BMS characteristics
BMS operation
BMS classification
Unit: B-5
Battery Pack Sizing
size battery pack with considering all aspect of condition -
Range Calculation
Battery Capacity
Battery String Calculation
Unit: B-6
Battery Pack construction
Material need to assemble battery pack
Wires, connector selection, heat shrink, cell holder etc.
Different types of accessories related to battery pack construction
Battery Pack Assembly line - Thermal management, Module to Pack Formation, Master BMS intregration
Battery Pack Assembly line - Pack Housing, Testing, Quality Certification
Unit: B-7
Battery Pack Assembly process
Manufacturing process of battery pack
Safety Considerations for BMS (Thermal Runaway, Short Circuit Detection etc)
Functional Safety Overview
Brief discussion about different machineries used in manufacturing
Flow chart of assembly process of li ion battery pack
Technical details of manufacturing machineries
Unit: B-8
Financial Projection of Li ion battery pack Manufacturing
Cost analysis of different machineries and manpower requirements
Return of Investment (ROI) of li ion battery pack business
Business projection to start a li ion battery pack business
Unit: CI
Charging Infrastructure - Electric Drive and controller
Introduction to EV Charging technology
Onboard charging and Off-board charging
AC charging vs DC charging
Conductive Charging - AC & DC
Inductive Charging Static
Inductive Charging Dynamic
AC charging - Type 1,2,3
DC charging - Chademo, Tesla, CCS
Fast charging and its limitations
Smart charging and applications
Introduction of Vehicle to grid (V2G) technology
Introduction of Wireless charging of EV
On-road charging of EV
Battery swap technology
Solar-powered EVs
Electric Vehicle Supply Equipment -
Different types of EV charger connectors
single-phase or three-phase socket
SAE J1773
CHAdeMO standard - DC fast charging
SAE J1772 Combo
Cords and Cables, Earthing, Lightning Protection of Electric Vehicle Charging, Residual current device (RCD)
National & International EV Standard Codes - IEC applicable for EVSE
Unit: CSA
Charging Station Site Assessment
site analysis for EV charging station
Choosing the location - Public charging stations
Site Selection Considerations, General Site Issues, URDPFI Guidelines, Planning Considerations
Design Guidelines and Site Drawings, EVSE Typical Site Plans, Station Configuration
Unit: CSD-1
Charging Station Design & Costing - EV with PV
Energy consumption
Guidelines on Charging Infrastructure
Public Charging Infrastructure (PCI) - Components of charging station
Finincial Detail of charging station
Proposed Tariff for EV Charging
Electric Vehicle Charging Tariff in Different States of India
Unit: CSD-2
Charging Station Design & Costing - Part 2
PLANNING FOR YOUR STATION
Solar powered electric vehicle charging station
Calculation and selection - Components of charging station
Finincial Detail of charging station
Unit: CSD-3
Charging Station Design - Part 3
Design On-Grid solar charging stations for a parking lot
Plans for EVSE Installation
Single line diagram of charging station
EV Related Signage
Unit: SEV
Safety for EV Charging System
Electrical safety from the charging socket to the electric vehicle
Different aspects of electric safety
Electric Vehicle Charging Safety Guidelines
Protection against electric shock, fault protection
IEC IEC 60068-2 (1,2,14,30), IEC 61683, IEC 60227, IEC 60502 IEC 60947 part I,II, III ,IEC 61215 and more
Unit: ICS
Installation of EV Charging Station
Charging Station Permitting
Execution of work
Installation Instruction
Installing an outdoor public station
Pedestal Charging station
Installation Procedure
Unit: EVB
EV Business - Government rules and opportunity
Future trends in electric vehicle domain
Wireless charging of EV
On-road charging of EV
Battery swap technology
Solar powered EVs Charging EVs from renewables
Business Model/Case Study
What is the size of the EV market in India?
Govt. Policies and Regulations
Business models, Utilities , Charging space providers, Battery swapping, Digital and information technology
Business Model
Project based Practical
Battery Project
Self Project Documentation: Lithuim-ion Battery pack Production Line
Battery Lab
Lithuim-ion Battery pack Production Line Optional: available at Head office at any time.
Pre production Testing
Cell Capacity Testing
Lithium-ion Battery layout drawing & design
Selection of Battery Pack Construction Meterials
Cells Spot welding
BMS Intregation
Install in Thermal Isolation
Battery Pack Enclosure Installation
Battery Pack Ageing (Charging Discharging) Test
Battery pack Quality Testing
Preparation of Battery pack Datasheet
Pack specification, safety sign, Leveling
Boxing for Transport
CS Project
Self Project Documentation: Road side Public Charging Station
Location Selection
Volume of Vehicle Projection
CS Design
BOQ
Financial Projection
Vendor Selection
Work Flow Presentation
Approval Documentation
Income and ROI Projection
Final Project Documentation
CS Lab
Level - II Charging station Installation Optional: available at Head office at any time.
Read the manufacturer’s installation instructions
Check drawings and specifications
Calculate the total load according to the Code and ensure there is an adequate supply voltage distribution panel nearby;
Check required conduits and excavation
Provide physical protection from vehicle impacts, e.g., bumper posts, safety
clearance or a raised platform.
Provide for adequate lighting of the station and the surrounding area
Clearly identify where charging vehicles are to park, using both ground markings and signage
Follow Installation Flowchart
Follow Electrical Connection Flowchart
Follow Electrical Code and EVSE Code
A separate branch circuit is installed for each station
Follow Electrical distribution room design
Follow Single-phase distribution wiring
Supply line switch on
Charger Switch on
Troubleshooting of Charger
Connect Charger gun with vehicle (Prototype Model), Test charging
Disconnect Charger form Prototype Model
Check Charging billing system
Safety practice for CS Satff members
Regular and Periodic Maintaince
Indian candidates Fees Online Live Class Fees: Rs. 29999/-
Discount on Live Class Fees= 40%
Fees after discount: Rs. 17999/- Lab Practical Fees: Rs. 3,999/-
All Fees Excluding 18% GST
If you are interested to join at Practical session, we will inform you and pay Hands on Practical Fees at that time.
Foreign Candidates Fees
Online Live Class Fees: $ 470 USD
Discount on Live Class Fees= 40%
Fees after discount: $ 282 USD
All Fees Excluding 18% GST
AEVT Admission cell will check form data and they will inform you to pay Course fees
Deposit Course fees
Admission cell will send your E-registration certificate and E-library access
Training cell will send you class schedule
Trainiers Team will send your class link
Training cell inform you about practical session at the end of Online live class session
Exam cell will conduct online examination and send E-Certificate, E-marksheet
EDP Desk will provide business guide/support for you (https://edpdesk.gatetrust.org )
Become an EV Expert with Verified Skill Certification
Academy of EV Technology is a unit of Global Advanced Training and Educational Trust (GATE Trust), An International Institute
1. An Autonomous Institute registered under NCT, Govt. of India under Indian Trust Act.
2. Registered Under NGO-DARPAN, NITI Aayog Govt. of India 3. ISO 9001:2015 registered Educational Trust
4. Academic Partner of University of Petroleum & Energy Studies (2020)
5. Registered under 80G and 12A and CSR Act, Govt. of India 6. Awarded Full Accreditation by International Accreditation Organization (IOA) for global education standards.
7. Fully organised Practical and Research Lab at GATE Trust Howrah, West Bengal
8. GATE Research - Research unit of Global Advanced Training and Educational Trust. You can Write & Publish a Review/Research paper,
EVSEMart is an Electric Vehicle equipment directory that B2B and B2C companies can use.
Customers can search for suppliers, distributors, manufacturers, vendors in Electric Vehicle industries.
customers can quickly find what they want and get the sales process going.
